Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3850 stack

i have two 3850. two switch status is the stack

When reconnecting stack cables, reboot all

switch 1 -  %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.Resetting .......

switch 2 -  %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.Resetting .......

Why I don't know what all the reboot

help me

Everyone's tags (1)
4 REPLIES
Hall of Fame Super Gold

When you connect two switches

When you connect two switches via stacking, whether it is 2960S/X/XR, 3750/G/E/X, 3650 or 3850, make sure the 2nd switch is POWERED OFF.

 

If you connect the 2nd switch with the power the entire stack will reboot.  This is by design.

New Member

hi thank your answer~two

hi thank your answer~

two switch is the 3850-24T

when i connected 2nd switch, with power on

if this is power down, no reboot?

Hall of Fame Super Gold

I don't understand what you

I don't understand what you are trying to say.

Cisco Employee

miname,Yes that is what

miname,

Yes that is what beeing said above.

1- If you connect the 2nd Switch with power on === The complete stack would reboot.

 

2- If you connect the 2nd switch with power off ==> Stack would not reboot.

 

Hope this clarifies.

 

87
Views
0
Helpful
4
Replies