Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4500 Oversubscription question

Hello Just curious if anyone has done any troubleshooting on packet loss over the uplinks to the asic on 4500 platform. We are running WS-X4548-GB-RJ45 modules which has an 8:1 oversubscription with 6 gbps but I want to verify drops on the uplinks to the backplane per port group. Currently running 12.2 ios on sup 4. Thx ~Bill
Everyone's tags (1)
1 REPLY
Super Bronze

DisclaimerThe Author of this

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Is should be 8 ports per gig.  Or to quote Cisco's data sheet:

Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group

What additional verification were you seeking?

230
Views
0
Helpful
1
Replies
CreatePlease login to create content