The feature list for IOS 12.x and 15.x for the Catalyst 4500 series specifically says it does not support reflexive ACL's or CBAC (unlike the bigger 6500 series). However, release notes for IOS XE 3.5.0E or better make no mention of it at all.
Can anyone verify if these are supported on your 4500E with 3.51 or 3.52? It's the difference between buying a pair of 4500E's for VSS mode vs going up to the 6500E chassis.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...