Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

4500E Supervisor Engine 8-E Uplinks

Hi,

Please I want to find out if it is possible to use all uplinks ports on the 8 port Sup8-E modules configured as a redundant pair on a single 4510R+E chassis?

I noticed that only 4 ports are active on each sup8-E modules (making it a total of 8 ports) but I will like to use all 16 uplink ports on both modules.

The chassis is licensed for entservices and the current ios is Cisco IOS XE Release 3.3.0XO(15.1(1)XO).

Thanks in advance for your help.

 

Regards,

Josh.

Everyone's tags (2)
3 REPLIES
VIP Super Bronze

Hi,When you have 2 sups in

Hi,

When you have 2 sups in the chassis, you can only have 4 ports active per sup.

HTH

Community Member

Yes.. 4 ports per sup. If you

Yes.. 4 ports per sup. If you only had one sup then you can have 8 ports active

Community Member

Hello,you can 4x 1/10Giga

Hello,

you can 4x 1/10Giga ports per SUP when you have 2 SUPs in a 4510R+E...but it seems that if you have a 4507R+E you can have only 2x 1/10 Giga ports per SUP

See Table High-Availability, Uplink and Wireless Options for Supervisor Engine 8-E in http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-728191.html

It will be possible in future to not have this limitation?!?

BR

Omar

 

 

 

2226
Views
0
Helpful
3
Replies
CreatePlease to create content