Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

4500X-40ES GLC-T 100MB Nego

Hi All,

We have a  small network in which we are using 4500X as core switch and 2960S as access switches.

The Access switche and IP Routing part is working fine so far no issues, but we are facing one issue with regards to interfaces.

We have IPTV Headend streaming devices connected to 4500X via GLC-T SFP, the link is not coming up and we found that heandend device 10/100.

Any chance to bring this interface up and running, I see the below in release not but I am not able to do the same.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_29984-01.html

Forced 10/100 Autonegotiation

Yes

Yes

AM-HH-PA-Core1#sh module

Chassis Type : WS-C4500X-32

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.

---+-----+--------------------------------------+------------------+-----------

1    32  4500X-32 10GE (SFP+)                   WS-C4500X-32       JAE17330B3R

2     8  10GE SFP+                              C4KX-NM-8          JAE17360EUW

M MAC addresses                    Hw  Fw           Sw               Status

--+--------------------------------+---+------------+----------------+---------

1 f0f7.55c4.9700 to f0f7.55c4.971f 2.0 15.0(1r)SG10 03.04.00.SG      Ok      

2 c067.af29.6428 to c067.af29.642f 1.0    

As per verification the interface capability are only 1000/10000.

Any help would be highly appreciated.

Regards

-Saji

539
Views
0
Helpful
0
Replies
CreatePlease to create content