Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4500x does not have "switch" command

I'm attempting to setup VSS pair on 4500x. 1 of the 2 switches appear to missing some commands:

 

On my Switch 1 this is the code:

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.03.02.SG RELEASE SOFTWARE (fc1)

Directory of bootflash:/

31682  -rw-   112660260  Dec 13 2013 15:52:45 +00:00  cat4500e-universal.SPA.03.03.02.SG.151-1.SG2.bin

 

On Switch 2 that appears to be running fine is running:

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.04.02.SG RELEASE SOFTWARE (fc1)

CR-CYL-DC-SWC-02#dir bootflash:
Directory of bootflash:/

158402  -rw-   121703744  Nov 25 2013 02:56:07 +00:00  cat4500e-universal.SPA.03.04.02.SG.151-2.SG2.bin

 

 

On Switch 1 when i attemp to create VSS, I get the following:sw

Switch(config)#switch ?                      
% Unrecognized command
Switch(config)#switch

 

is this switch set in a particular mode that's preventing or do i have a bad code loading.. ? please advise..

 

Thanks

1 REPLY
New Member

 After taking a look at the

 

After taking a look at the current IOS on the switch I do not see VSS mentioned in the release notes. You may need to move up to a newer IOS version to solve this issue. The very next IOS 3.4.4SG seems to support VSS.

 

http://software.cisco.com/download/release.html?mdfid=283904596&softwareid=282046477&release=3.3.2SG

221
Views
0
Helpful
1
Replies
CreatePlease login to create content