cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
462
Views
0
Helpful
2
Replies

4506 Problem

r.shell
Level 1
Level 1

Has anyone ever had this happened to a 4506 blade?

May 18 03:40:19: %EC-5-UNBUNDLE: Interface GigabitEthernet1/1 left the port-channel Port-channel1

May 18 03:40:19: %EC-5-UNBUNDLE: Interface GigabitEthernet1/2 left the port-channel Port-channel1

May 18 03:41:49: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: Packet received with invalid source MAC address (79:73:74:20:34:35) on port Gi1/1 in vlan 1

.May 18 06:58:18: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Lemans 3-3(Gi3/17-24) - management request timed out.

The last entry was when I was able to council into the switch. A reinsert of the card did not help. Reboot did return switch to normal.

Any thoughts? Thanks

2 Replies 2

gpulos
Level 8
Level 8

Using the 'Error Message Decoder' on cco:

First Error: %C4K_L2MAIN....

This indicates a packet was received with an all zeros or a multicast source ip address.

Please see the following link for more info on the error:

http://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi?action=search&index=all&locale=en&query=%25C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET&counter=0&paging=5&links=reference&sa=Submit

Second Error: %C4K_LINECARD....

This indicates a problem with an ASIC on the line card. If occuing often, this may be indicative of a problem. If only once, it should be ok.

Please see the following link for more info on this error:

http://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi?action=search&locale=en&index=all&query=%25C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING&counter=0&paging=5&links=reference&sa=Submit

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card