Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
Blue

4506 SFP SUP ports

Whats with the sfp gig ports on a SUP V for the 4506s? There are restrictions on their use. I tried using them as uplinks to a fiber riser to a 6513 yesterday and it didnt work.

What is idfferent about the SUP sfp ports from the ones found on a dedicated I/O card??

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: 4506 SFP SUP ports

On the SupV-10GE, you can use either the TenGig ports or the SFP Gig ports. SFP and 10-Gigabit Ethernet uplink options cannot be used simultaneously. By default, the TenGig ports are enabled, so to use the SFP gig ports, simply use the following command:

hw-module uplink select gigabitethernet

2 REPLIES
Silver

Re: 4506 SFP SUP ports

On the SupV-10GE, you can use either the TenGig ports or the SFP Gig ports. SFP and 10-Gigabit Ethernet uplink options cannot be used simultaneously. By default, the TenGig ports are enabled, so to use the SFP gig ports, simply use the following command:

hw-module uplink select gigabitethernet

Blue

Re: 4506 SFP SUP ports

Thanks, Thomas

170
Views
0
Helpful
2
Replies
CreatePlease to create content