4507 Sup Question

[Neuromancer]

My office has a SupIII (WS-X4014) that we're trying to install in a 4507R. However, we are finding conflitcting info from Cisco about their compatibility.

The 4500 Data Sheet doesn't list the SupIII as a compatible Sup Engine : http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet0900aecd801792b1.html

But the Installation Guide for the 4500 says that it does (page 1-19 and 1-12): http://cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/4500inst.html

Any help or clarification is appreciated!

[Edison Ortiz]

The second link mentions that it does because the 4503 and 4506, but it won't work on the 4507R as the first link states.

Please see another link :)

http://cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html

"Supervisor Engine III (WS-X4014), which is used in the Catalyst 4006, 4503, and 4506 switches"

[Jon Marshall]

Hi Christopher

I think it's a typo in the second document. I agree with Edison and would add a further link to back it up.

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a008063c36f.shtml

HTH

Jon