Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4507 Sup Question

My office has a SupIII (WS-X4014) that we're trying to install in a 4507R. However, we are finding conflitcting info from Cisco about their compatibility.

The 4500 Data Sheet doesn't list the SupIII as a compatible Sup Engine : http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet0900aecd801792b1.html

But the Installation Guide for the 4500 says that it does (page 1-19 and 1-12): http://cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/4500inst.html

Any help or clarification is appreciated!

2 REPLIES
Hall of Fame Super Bronze

Re: 4507 Sup Question

The second link mentions that it does because the 4503 and 4506, but it won't work on the 4507R as the first link states.

Please see another link :)

http://cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html

"Supervisor Engine III (WS-X4014), which is used in the Catalyst 4006, 4503, and 4506 switches"

Hall of Fame Super Blue

Re: 4507 Sup Question

Hi Christopher

I think it's a typo in the second document. I agree with Edison and would add a further link to back it up.

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a008063c36f.shtml

HTH

Jon

132
Views
0
Helpful
2
Replies
CreatePlease to create content