4507R+E with redundant sup8E needs license activation

[Central Admins]

I found documentation that says to issue the command:

license right-to-use activate entservices acceptEula

I could not find any documentation that mentioned the affects of dual sup mode when doing this.

Does any know the exact steps I need to take to make sure both sups licenses have been activated?

Thanks,

[Reza Sharifi]

You have to use command "remote login module 6" to access the standby sup.

also, see this document:

You can access the standby virtual console from the active supervisor engine with the attach module, session module, or remote login commands on the active supervisor engine. You must be in privilege EXEC mode (level 15) to run these commands to access the standby console.

Link:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/01xo/configuration/guide/config/RPR.html

HTH