I have a question, I am new at this design / ordering stuff, and wonder to know if there is any tool that can validate my order, like the parts I am ordering will work togheter... there is?!
We are planning to install a customer using a 4507R at the core, and a collapsed Access / Distribution with a mix of 3750E and 3750, so we can use Uplinks at 10Ge, as suggested by our friends hostmaster, jon.marshall and
specially mr. asingh2!
There will be 2 floors + Core located at the 2nd Floor, here is what I am planning to order:
For sure all the info you gave me helped ALOT! Really thanks!
But now I am a bit confused about Q2, regarding the tengig slots... I do not know if I missunderstand what you said, but, just to clarify a bit more, it means that I cannot use the 4 ports (2 of the first Sup and 2 of the second Sup) at the same time?! I can only use 1 port of each Sup and the other one will be in standby or something like that?! By this I will have 2 tengig working and 2 tengig in standby?
Yes, only the first 10Gig port of each sup is active in a redundant sup config. i.e only the ports 1/1 and 2/1 are active, the other 2 ports 1/2,2/2 are disabled.If one of the sup fails both the 10gig ports will get active on the sup engine.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.