Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

4507R High CPU on Cat4k Mgmt LoPri

Have installed some Netflow daughter cards on SUP4's. Code rev is 12.2.25ewa10. Cards were installed Jan 31st and no issues were seen. Netflow isn't even enabled right now. I'm just not sure what is causing such high CPU on that process?

CPU utilization for five seconds: 88%/1%; one minute: 83%; five minutes: 84%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

30 346822128 120654753 2874 62.41% 56.18% 57.19% 0 Cat4k Mgmt LoPri

29 162373880 458524072 354 9.25% 9.16% 8.95% 0 Cat4k Mgmt HiPri

54 266972088 107767335 2477 8.37% 10.24% 10.29% 0 Spanning Tree

27 42139652 60577941 695 1.91% 1.52% 1.47% 0 Per-Second Jobs

60 45757540 76205530 600 1.75% 1.63% 1.60% 0 IP Input

150 5687764 6529600 871 0.63% 0.41% 0.41% 0 RIP Send

18 16161936 39711963 406 0.47% 0.48% 0.47% 0 ARP Input

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: 4507R High CPU on Cat4k Mgmt LoPri

2 REPLIES
Purple

Re: 4507R High CPU on Cat4k Mgmt LoPri

Community Member

Re: 4507R High CPU on Cat4k Mgmt LoPri

Thanks! Yes, I realized that this traffic is actually normal.

1601
Views
0
Helpful
2
Replies
CreatePlease to create content