Here i have a two cisco4507R switches and configured with VLANs..Here need to connect cisco4507R switches to juniper SSG 140 firewall with individual cables.can anybody help in configuration at Juniper side..Here I am not supposed to ask this question..Coz it is combined of both firewall and ciscoswitches,,thts y i am asking..
Yes,,i want to use SSG as a gateway to the switches...And here the one 4507R is connected to ethernet port on SSG,And also 2nd 4507R is connected to other ethernet port on the SSG...i want to know the configuration at SSG...and routing to out side..
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...