cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
550
Views
0
Helpful
0
Replies

4510R+E syslog messages C4K_SUPERVISOR-3-LINKDFEWATCHDOGTIMEOUT: Module

Steve Wood
Level 1
Level 1

Brand new out of the box and I am getting these error messages in syslog. Anyone seen these ?

Found an explanation here but it doesn't mean much to me. It obviously is finding issue with the 4712's

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1/XE_330SG/system/messages/sem_15_1/emsg.html

Error Message    C4K_SUPERVISOR-3-LINKDFEWATCHDOGTIMEOUT: Module [dec] dfe training 
between [char] and Standby Sup  is not complete within expected time.

Explanation    NOT AVAILABLE YET.

Recommended Action    Link DFE training did not complete before the end of bulk sync. This may affect traffic on the links that failed to complete DFE training.

 

C4K_SUPERVISOR-3-LINKDFEWATCHDOGTIMEOUT: Module 4 dfe training between Mux and Standby Sup is not complete within expected time.
*Jul 17 12:05:37.474: %C4K_SUPERVISOR-3-LINKDFEWATCHDOGTIMEOUT: Module 7 dfe training between Mux and Standby Sup is not complete within expected time.
*Jul 17 12:05:40.222: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded
*Jul 17 12:05:40.225: %RF-5-RF_TERMINAL_STATE: 5 ha_mgr:  Terminal state reached for (SSO)

Switch#sh module
Chassis Type : WS-C4510R+E

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
 1    48  10/100/1000BaseT Premium POE E Series  WS-X4748-RJ45V+E  
 2    48  10/100/1000BaseT Premium POE E Series  WS-X4748-RJ45V+E  
 3    48  10/100/1000BaseT Premium POE E Series  WS-X4748-RJ45V+E  
 4    12  1000BaseX SFP                          WS-X4712-SFP-E    
 5     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E     
 6     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E     
 7    12  1000BaseX SFP                          WS-X4712-SFP-E    

 M MAC addresses                    Hw  Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
 1 6412.25fe.f740 to 6412.25fe.f76f 1.5                               Ok       
 2 1005.ca82.5540 to 1005.ca82.556f 1.5                               Ok       
 3 7426.ac47.eed8 to 7426.ac47.ef07 1.5                               Ok       
 4 a80c.0dea.e6b0 to a80c.0dea.e6bb 1.0                               Ok       
 5 18e7.28a1.f700 to 18e7.28a1.f703 2.1 15.0(1r)SG10 03.05.02.E       Ok       
 6 18e7.28a1.f704 to 18e7.28a1.f707 2.1 15.0(1r)SG10 03.05.02.E       Ok       
 7 a80c.0dea.de40 to a80c.0dea.de4b 1.0                               Ok       
          
Mod  Redundancy role     Operating mode      Redundancy status
----+-------------------+-------------------+----------------------------------
 5   Active Supervisor   SSO                 Active                            
 6   Standby Supervisor  SSO                 Standby hot                      

 

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: