03-16-2010 03:16 AM - edited 03-06-2019 10:09 AM
Hi All
I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.
Pictures confuse me. :-)
C
Solved! Go to Solution.
03-16-2010 03:27 AM
Hi All
I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.
Pictures confuse me. :-)
C
Yes, see this doc -
http://www.cisco.com/en/US/products/hw/switches/ps4324/ps5653/index.html
Jon
03-16-2010 03:27 AM
Hi All
I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.
Pictures confuse me. :-)
C
Yes, see this doc -
http://www.cisco.com/en/US/products/hw/switches/ps4324/ps5653/index.html
Jon
03-16-2010 06:16 AM
Great, thanks Jon - I just wanted to be 100% sure before we release the final config for this switch. Nothing worse than having to spend two days going up a mountain to fix a config error!
Cheers
C
PS: Apologies for the typo in the subject line - it should be a 4510R switch!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide