Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4510R with dual Sup 6 modules

Hi All

I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.

Pictures confuse me. :-)

C

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: 5410R with dual Sup 6 modules

connie@petech.ac.za

Hi All

I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.

Pictures confuse me. :-)

C

Yes, see this doc -

http://www.cisco.com/en/US/products/hw/switches/ps4324/ps5653/index.html

Jon

2 REPLIES
Hall of Fame Super Blue

Re: 5410R with dual Sup 6 modules

connie@petech.ac.za

Hi All

I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.

Pictures confuse me. :-)

C

Yes, see this doc -

http://www.cisco.com/en/US/products/hw/switches/ps4324/ps5653/index.html

Jon

New Member

Re: 5410R with dual Sup 6 modules

Great, thanks Jon - I just wanted to be 100% sure before we release the final config for this switch. Nothing worse than having to spend two days going up a mountain to fix a config error!

Cheers

C

PS: Apologies for the typo in the subject line - it should be a 4510R switch!

310
Views
0
Helpful
2
Replies