Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

4510RE-S7; right end of the modules WS-X4648-RJ45-E shows RED LED

Hi,

I have installed new WS-C4510RE-S7+96V+ with 6 nos of WS-X4648-RJ45-E and 2 nos of WS-X4748-RJ45V+E modules. All modules status LED show Green. Right end of the modules  WS-X4648-RJ45-E shows RED LED ,this is not port LED. But WS-X4748-RJ45V+E shows Green.

  Why it is so? is itnormal condition?

Current  IOS Image:-  cat4500e-universalk9.SPA.03.04.01.SG.151-2.SG1


Thanks

Sujish Sudhakaran

334
Views
0
Helpful
0
Replies