05-04-2012 12:53 PM - edited 03-07-2019 06:31 AM
Hi there,
I am little confused with all these SFP types.
Can I use GLC-LH-SM, GLC-LH-SMD and SFP-GE-L with Twingig converter module? When I used Cisco configuration tool, the only option is GLC-LH-SMD for 1000BASE-LX.
Thanks,
Solved! Go to Solution.
05-04-2012 02:10 PM
Hi,
Here are all the supported Optics with Twingig converter
GLC-T
GLC-SX-MM
GLC-LH-SM
GLC-ZX-SM
GLC-SX-MMD
GLC-LH-SMD
Also see table-8 in this link:
HTH
05-04-2012 06:49 PM
End-of-Sale and End-of-Life Announcement for the Select Cisco Gigabit Ethernet SFP Modules
Any SFP that ends with a "D" means it supports Digital Optical Monitoring (DOM).
SFP-GE-L is similar to GLC-LH/LX but is not supported on the 4900M. or TwinGig converter.
05-04-2012 02:10 PM
Hi,
Here are all the supported Optics with Twingig converter
GLC-T
GLC-SX-MM
GLC-LH-SM
GLC-ZX-SM
GLC-SX-MMD
GLC-LH-SMD
Also see table-8 in this link:
HTH
05-04-2012 06:43 PM
Thanks, just curious what is difference between SFP-GE-L and GLC-LH-SMD?
05-04-2012 06:49 PM
End-of-Sale and End-of-Life Announcement for the Select Cisco Gigabit Ethernet SFP Modules
Any SFP that ends with a "D" means it supports Digital Optical Monitoring (DOM).
SFP-GE-L is similar to GLC-LH/LX but is not supported on the 4900M. or TwinGig converter.
05-04-2012 09:42 PM
You need also consider that base 4900M chassis does not support TwinGig converters.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: