Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4900M with WS-X4908-10G-RJ45

Just received one of these switches. My understanding is the 10G ports on the

WS-X4908-10G-RJ45 should be able to connect to a 1 G port on another switch.

However I can not get this to happpen. Using either a crossover or straight through cable.

Everyone's tags (1)
4 REPLIES
VIP Super Bronze

4900M with WS-X4908-10G-RJ45

These are only 10Gig ports and not 1Gig.  So, you can't connect a 1Gig port to a 10Gig.

4900M 8 port 10GBase-T (RJ-45) half card

WS-X4908-10G-RJ45 (=)

hth

Hall of Fame Super Gold

4900M with WS-X4908-10G-RJ45

I'm with Reza.

The logic behind the reason (why this line card will only run on 10Gbps) is:  WHY?

Why purchase a very expensive line card and let it run 1 Gbps when there are more affordable line cards with much, much more density.

New Member

4900M with WS-X4908-10G-RJ45

The reason is why we bought the switch for our ap server to communicate with our database server. But we dont need it on our main network which is only 1 gig. We really dont need all the ports of the 20 port gig card.

New Member

4900M with WS-X4908-10G-RJ45

And by the way it is possible

the command is

hw-module module 2 port-group 1 select gigabitethernet

this sets port 2/1 and port 2/2 to gig

they are both set due to the way the ASIC in the card works

yes it works

990
Views
0
Helpful
4
Replies
CreatePlease login to create content