Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4948 Configuring etherchannel

I am looking into the possibilty of stacking 4948 switch via connecting by etherchanneling. Does anyone know how i would config etherchannel.

2 REPLIES
Cisco Employee

Re: 4948 Configuring etherchannel

Please use the link below for configuring ether-channel on 4948 switches.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_31s/conf/channel.htm

HTH,Please rate if it does.

-amit singh

Purple

Re: 4948 Configuring etherchannel

On your connecting links add the following "channel group 1 mode desirable non-silent" . If you need trunks also that is additional configs , search on cisco.com for trunking and etherchannel .

657
Views
0
Helpful
2
Replies