Re: 4948 etherchannel or LACP to Intel Quad GigE NIC configuatio
Is the etherchannel actually working ? show etherchannel detail . If you look at the port channel it says BW 4000000 Kbit . You have to remember this is a little misleading because even though you have 4 gig of potential bandwidth any 1 conversation will only have access to one gig total . Etherchannel is more of a bandwidth sharing function as traffic gets balanced across all 4 links based on a algorithim based on the mac address I believe . So traffic is basically balanced across all 4 links based on either the mac address or the source or destination ip address , so any 1 conversation will always use the same link so it has access to 1 gig for that conversation along with whoever else happens to be using that link at the same time.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...