Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

6500 Bandwidth Limiting

Hello All,

I was wondering if someone could provide some assistance. I have a 4500 and 6500 that I'd like to be able to limit the bandwidth of layer 2 switchports. So for instance I have all GB blades but certain servers I'd like only to have connections of about 5 Mb per second or 15 Mb per second etc. Can someone how I can accomplish this? Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: 6500 Bandwidth Limiting

Hi,

May be this will work.

For the 5Meg port try this :-
!
access-list 101 permit any any
!
class-map match-any TEST5M
match access-group 101
!
!
policy map TEST5M
class TEST5M
police 5000000 conform transmit exceed drop
!
!
interface fastethernet 4/1
desc *** TEST 5 MEG INPUT ***
service policy input TEST5M
!

For the 15Meg port try adding this:-

!
class-map match-any TEST15M
match access-group 101
!
!
policy map TEST15M
class TEST15M
police 15000000 conform transmit exceed drop
!
!
interface fastethernet 4/2
desc *** TEST 15 MEG INPUT ***
service policy input TEST15M
!

Regards
Alex

Regards, Alex. Please rate useful posts.
1 REPLY
Green

Re: 6500 Bandwidth Limiting

Hi,

May be this will work.

For the 5Meg port try this :-
!
access-list 101 permit any any
!
class-map match-any TEST5M
match access-group 101
!
!
policy map TEST5M
class TEST5M
police 5000000 conform transmit exceed drop
!
!
interface fastethernet 4/1
desc *** TEST 5 MEG INPUT ***
service policy input TEST5M
!

For the 15Meg port try adding this:-

!
class-map match-any TEST15M
match access-group 101
!
!
policy map TEST15M
class TEST15M
police 15000000 conform transmit exceed drop
!
!
interface fastethernet 4/2
desc *** TEST 15 MEG INPUT ***
service policy input TEST15M
!

Regards
Alex

Regards, Alex. Please rate useful posts.
342
Views
0
Helpful
1
Replies
CreatePlease to create content