11-30-2008 09:33 PM - edited 03-06-2019 02:44 AM
Hi All
I am trying to delete on syslog server(20.1.128.105) and add new syslog server(20.1.36.144)
the problem is whenei give show config i see still the same oldsyslog server 20.1.128.105 unable to find new one
can u suggest me where is the worng
regds
Adhi
LOGS Pasted below
clear logging server 20.1.129.105
System logging server 20.1.129.105 removed from system logging server table.
DC-6513-2> (enable) 2008 Dec 01 05:22:29 %SYS-6-CFG_CHG:Global block changed by telnet/
DC-6513-2> (enable) set logging server 20.1.36.144
20.1.36.144 added to system logging server table.
ATL-2100-DC-6513-2> (enable) 2008 Dec 01 05:22:49 %SYS-6-CFG_CHG:Global block changed by telnet/
11-30-2008 11:09 PM
Hi,
Are you trying to delete 20.1.128.105 or 20.1.129.105 , Im sure is typo?
from the log you posted seems 20.1.129.105 has been removed , and 20.1.36.144 has been added.
from that switch can you post the output of show config | inc logging
Rgds
Jorge
12-01-2008 12:06 AM
HI
Thanks very much for your reply yes it is 20.1.129.105
Please find the output of switch
DC-6513-2> (enable) sh conf | in logging
set logging server enable
set logging server 20.1.129.105
set logging server 20.1.129.111
set logging server 20.1.128.228
set logging level gl2pt 2 default
set logging level diag 2 default
DC-6513-2> (enable)
12-01-2008 10:37 AM
what version of catos are you running?
12-01-2008 10:42 PM
Hi
IOS version is below
=======================
WS-C6513 Software, Version NmpSW: 8.5(2)
System Bootstrap Version: 7.1(1)
System Web Interface Version: Engine Version: 5.3.4 ADP Device: Cat6000 ADP Version: 8.0 ADK: 49
System Boot Image File is 'bootflash:bootflash'
System Configuration register is 0x2
Hey i am able to see the configured syslog server by using below commands
-------------------
DC-6513-2> (enable) sh logging noalias
Trace logging: disabled
Logging buffer size: 500
timestamp option: enabled
Logging history:
size: 1
severity: warnings(4)
Logging console: enabled
Logging telnet: enabled
Logging server: enabled
{20.1.36.144, 20.1.36.143, 20.1.128.228}
server facility: LOCAL4
server severity: information(6)
Current Logging Session: enabled
Callhome Functionality: disabled
Callhome Severity: LOG_CRIT(2)
I think it could be problem with IOS , but the IOS with lesserver version dont have this problme
Any commnets
regds
Adhi
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: