Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6500-CATSwitch-Unable to add syslog{Urgent}

Hi All

I am trying to delete on syslog server( and add new syslog server(

the problem is whenei give show config i see still the same oldsyslog server unable to find new one

can u suggest me where is the worng



LOGS Pasted below

clear logging server

System logging server removed from system logging server table.

DC-6513-2> (enable) 2008 Dec 01 05:22:29 %SYS-6-CFG_CHG:Global block changed by telnet/

DC-6513-2> (enable) set logging server added to system logging server table.

ATL-2100-DC-6513-2> (enable) 2008 Dec 01 05:22:49 %SYS-6-CFG_CHG:Global block changed by telnet/


Re: 6500-CATSwitch-Unable to add syslog{Urgent}


Are you trying to delete or , Im sure is typo?

from the log you posted seems has been removed , and has been added.

from that switch can you post the output of show config | inc logging



New Member

Re: 6500-CATSwitch-Unable to add syslog{Urgent}


Thanks very much for your reply yes it is

Please find the output of switch

DC-6513-2> (enable) sh conf | in logging

set logging server enable

set logging server

set logging server

set logging server

set logging level gl2pt 2 default

set logging level diag 2 default

DC-6513-2> (enable)

Re: 6500-CATSwitch-Unable to add syslog{Urgent}

what version of catos are you running?

New Member

Re: 6500-CATSwitch-Unable to add syslog{Urgent}


IOS version is below


WS-C6513 Software, Version NmpSW: 8.5(2)

System Bootstrap Version: 7.1(1)

System Web Interface Version: Engine Version: 5.3.4 ADP Device: Cat6000 ADP Version: 8.0 ADK: 49

System Boot Image File is 'bootflash:bootflash'

System Configuration register is 0x2

Hey i am able to see the configured syslog server by using below commands


DC-6513-2> (enable) sh logging noalias

Trace logging: disabled

Logging buffer size: 500

timestamp option: enabled

Logging history:

size: 1

severity: warnings(4)

Logging console: enabled

Logging telnet: enabled

Logging server: enabled


server facility: LOCAL4

server severity: information(6)

Current Logging Session: enabled

Callhome Functionality: disabled

Callhome Severity: LOG_CRIT(2)

I think it could be problem with IOS , but the IOS with lesserver version dont have this problme

Any commnets



CreatePlease login to create content