6500 CSM

[davegibelli]

The stupid manual does not give units for the interval used by a probe...does anyone know if these units are seconds or minutes?

[Jon Marshall]

Hi Dave

Presumably you are referring to the Content Switch Module ?. It is in seconds - see attached link

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/4.2.x/configuration/guide/helthmon.html#wp1025018

HTH

Jon

[davegibelli]

I should have said we are running software 4.1.1

In that manual the units are missing!

Has anyone acually run a test to confirm the units are seconds in v4.1.1?

[Jon Marshall · Accepted solution]

Okay, i haven't got 4.1.1 on any of our CSM's but with the CSM and the CSM-S versions i have used it has always been in seconds.

Quickest way to test would be to just sniff the traffic on one of your servers to see how often the probe turns up.

Sorry i can't be more help.

Jon

[andrew.burns]

Hi,

As far as I'm aware probes have always been in seconds.

Also, the 4.1.1 manual does say seconds, here:

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/4.1.x/4.1.1/configuration/guide/helthmon.html#wp1025018

HTH

Andrew.