Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6500-E with SUP720 compatibility with 10g module

I have 6509-E chasis with supervisor VS-S720-10G.

I need to add a new WS-X6708-10G-3C= module to this same chasis.

As per the cisco datasheet both the cards and the supervisor are compatible, just need to confirm this.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

6500-E with SUP720 compatibility with 10g module

IT should work.  The Sup2T will "downgrade" itself to the same level as your line card.

6 REPLIES
Hall of Fame Super Gold

6500-E with SUP720 compatibility with 10g module

WS-X6708-10G-3C

Should be compatible. 

Be aware that if you plan to upgrade your Supervisor card in the future to Sup2T, then you can't use this card.

Can you also post the output to the command "sh module".

New Member

6500-E with SUP720 compatibility with 10g module

is this card not completable with the SUP 2t ??

New Member

6500-E with SUP720 compatibility with 10g module

i have another chasis with SUP2T and i am ordering the same for that as well.

Hall of Fame Super Gold

6500-E with SUP720 compatibility with 10g module

WS-X6708-10G-3C will never be compatible with Sup2T.  The Sup2T has DFC4/PFC4 and the card has DFC3/PFC3 card which cannot be upgraded.

New Member

6500-E with SUP720 compatibility with 10g module

my supervisor is VS-SUP2T-10G with XL but i am ordering the module WS-X6816-10G-2T which is without the XL.

will there be any compatability issue ?

Hall of Fame Super Gold

6500-E with SUP720 compatibility with 10g module

IT should work.  The Sup2T will "downgrade" itself to the same level as your line card.

251
Views
0
Helpful
6
Replies