Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

6500 in ROMMON : cannot load the monitor library "bootdisk:%c7200-atafslib-m"

Hi,

While trying to upgrade 6500 IOS from 12.2SX33 to 15.1(2) code I get the ROMMON mode and it give the "cannot load the monitor library bootdisk:%c7200-atafslib-m" error message. I formatted the bootflash before loading the new image. Now I can't even load the 12.2SX33 image from the supbootflash. 

 

Any idea??

 

rommon 2 > set
PS1=rommon ! >
SLOTCACHE=cards;
LOG_PREFIX_VERSION=1
CV=bootdisk:s72033-ipservicesk9_wan-mz.122-33.SXH2.bin
RET_2_RTS=12:56:37 QATAR Wed Jul 11 2012
CRASHINFO=bootflash:crashinfo_SP_20120711-125637-QATAR
NT_K=0:0:0:0
RANDOM_NUM=1344956409
BSI=0
RET_2_RCALTS=
BOOT=bootflash:s72033-ipbasek9-mz.151-2.SY3.bin,12;bootflash:s72033-advipservice
sk9_wan-mz.122-33.SXJ3.bin,12;
?=0
rommon 3 > boot s72033-ipbasek9-mz.151-2.SY3.bin
Loading image, please wait ...

Invalid device specified
Booting from default device
open: file "c7200-atafslib-m" not found
monlib.open(): Open Error = -1
loadprog: error - on file open
cannot load the monitor library "bootdisk:%c7200-atafslib-m" from device: boot d
iskboot: cannot open "bootdisk:"
an alternate boot helper program is not specified
(monitor variable "BOOTLDR" is not set)
and unable to determine first file in bootflash
loadprog: error - on file open
boot: cannot load "s72033-ipbasek9-mz.151-2.SY3.bin"

1 REPLY
VIP Super Bronze

Hi,To load IOS 15 on the 6500

Hi,

To load IOS 15 on the 6500 series, you need a minimum of 512Mb RAM and 512Mb Flash.

a few questions:

1-what type of supervisor do you have?

2-how much memory and flash do you have?

HTH

773
Views
0
Helpful
1
Replies
CreatePlease to create content