Alright... I have QoS Deployed and working on my LAN, ingress marking everything appropriately at the edge (3750 stacks), and The core is trusting ingress traffic from the edge. What I have not yet figured out is how to get my traffic re-marked to match my WAN QoS policy. Effectively I want to restrict Marking of Video Traffic to a specific Video Conference system or group of Video Conference Systems (either based on MAC/Current Marking, or IP/Port matching so that only specific systems get QoS on the WAN (basically if they purchase QoS for a specific Unit).
I have 2 site models:
Cisco 6509 Core Switches, with Sup720's, with WS-X6748-SFP and WS-X6748-GE-TX blades running Modular IOS. Handing off to the Service Providers CE Router on a .1q trunk from the GE-TX blade.
Cisco 3750 switch stack, running IOS, and handing off L3 routed interface to the Service Providers CE Router.
PFC QoS supports the output keyword only with a PFC3 and only on Layer 3 interfaces (either LAN ports configured as Layer 3 interfaces or VLAN interfaces). With a PFC3, you can attach both an input and an output policy map to a Layer 3 interface.
You may want to open a service request at this point to see what else can be done.
There is a link now from the community to open a TAC case.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.