Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

6500 modem connection through console port

Hi all

When configuring a modem connection to Cat6500 console port (since it has no AUX port), is that configuration the same as it was an AUX port, this is, same commands under "line con 0" ?

This is an IOS switch

Thanks in advance

4 REPLIES
Silver

Re: 6500 modem connection through console port

Hello.

Just a note: Line "con 0" is a shortcut for line number. When you issue a "show line" command, it will return the real line numbers.

But to answer your question, yes, the console port is "line con 0" and it should be configurable in the same way, although i'm not sure how well it will work with modem.

Hope this helps

Silver

Re: 6500 modem connection through console port

Thanks for your reply

Purple

Re: 6500 modem connection through console port

It works fine with a modem we have dozens of them in our net with dial modems used for out of band access . You really don't have to configure much besides a password on them and the exec-timeout feature.

Silver

Re: 6500 modem connection through console port

Thanks for your reply. Well, my doubt is if also is necessary to configure same commands under "line con 0" such as:

login

modem InOut

modem autoconfigure type default

transport input all

autoselect ppp

...

this is, the same commands we have configured for the same modem connected to the aux port of another router

142
Views
3
Helpful
4
Replies