6500 modules

[ekeen]

Is there a command to show if a module has been restarted. I'm having a problem with one of my customers system and the staff nor I have a good understanding of how to look to see if the module is having probles. Any help would be greatly apprecitated. TIA

[vishwancc]

Hi,

Give show logs which will give you information on module restart.

Chao

Vishwa

[johnlloyd_13]

adding to what vishwa said, try to issue the command show module and it will show you the status of each module. we recently had a problem in one of our PoE module and a syslog looks like this:

%C4K_SWITCHMANAGER-4-S2WERRORREPORT

after we did a software reset, syslogs will show you this:

*Oct 27 13:02:57: %C4K_IOSMODPORTMAN-6-MODULEOFFLINE: Module 5 is offline

*Oct 27 13:02:58: %C4K_IOSMODPORTMAN-6-MODULEREMOVED: Module 5 is removed

*Oct 27 13:03:02: %C4K_IOSMODPORTMAN-6-MODULEINSERTED: Module 5 is inserted

*Oct 27 13:03:04: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 5 (WS-X4248-RJ45V S/N: JAE1028686W Hw: 3.1) is online

[andrew.burns]

Hi,

You can use this command:

show diagnostic events

After initial booting of the switch you should get an entry every time a module initialises.

HTH

Andrew.