6500 not booting neither from bootdisk or disk0: with illegal opcode error
One of the 6500 was going in bootrom mode, so I have formated the flash disk using the other Cisco 6500 switch and copied IOS file to the boot disk. But the 6500 booting failed with the following error
6500 not booting neither from bootdisk or disk0: with illegal op
Check the bootdisk/bootflash for any crashfiles. Might also be a corrupted IOS. Best way to confirm is to take a flash from another working 6500 after testing SXI9 to be working over there and use the same disk in this device. Not the easiest of methods
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...