04-23-2007 10:04 AM - edited 03-05-2019 03:37 PM
I have found password recovery procs for the route processor of CatOS (6500) but not for the switch processor. Would they be the same if I do the break sequence before it says 00:00:03: %OIR-6-CONSOLE: Changing console ownership to route processor.
Thanks.
Solved! Go to Solution.
04-23-2007 10:40 AM
Hi there,
The password recovery for the SP is different than the password recovery for the RP, here you are the one for the SP:
Take care that you have a window of 30 seconds to do it, i failed it the first time i tried it, try using a simple password at first may be a single letter password or simply a null.
HTH, please rate if it does help,
Mohammed Mahmoud.
04-23-2007 10:40 AM
Hi there,
The password recovery for the SP is different than the password recovery for the RP, here you are the one for the SP:
Take care that you have a window of 30 seconds to do it, i failed it the first time i tried it, try using a simple password at first may be a single letter password or simply a null.
HTH, please rate if it does help,
Mohammed Mahmoud.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: