03-26-2008 01:26 PM - edited 03-05-2019 10:00 PM
Can I do something like this to my 6509
interface Vlan99
ip address 192.168.99.100 255.255.255.0
ip address 192.168.99.1 255.255.255.0 secondary
long story short, have about 100 serves that are using 99.1 as their default gateway and several others using 99.100 as their dfgw.
6509 has Sup720 running native mode.
thanks
Solved! Go to Solution.
03-26-2008 01:37 PM
Hi
Well i just tested this on a 6500 run 12.2(18)SXF6 and it didn't complain and i could ping both addresses.
interface Vlan322
ip address 192.168.99.1 255.255.255.0 secondary
ip address 192.168.99.100 255.255.255.0
no ip redirects
end
Bear in mind this was in a lab environment, i have never done this in a production environment.
Jon
03-26-2008 01:37 PM
Hi
Well i just tested this on a 6500 run 12.2(18)SXF6 and it didn't complain and i could ping both addresses.
interface Vlan322
ip address 192.168.99.1 255.255.255.0 secondary
ip address 192.168.99.100 255.255.255.0
no ip redirects
end
Bear in mind this was in a lab environment, i have never done this in a production environment.
Jon
03-26-2008 01:50 PM
thanks. I remember seeing something in release notes long time ago about 6500 code support HSRP on secondary IP's.
Gee wish I had a 6500 in my lab. :)
03-26-2008 01:51 PM
No problem.
Yes, i appreciate i am lucky to have a 6500 to play with !
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide