According to the software advisor I show that 'ip slb' is supported in all three current trains (SXF, SXH, & SXI). Did you hear that this feature is being discontinued?
Most devices are headed to running some version of IOS 15 because that version supports Cisco's new licensing model. However, I have not seen any announcement or version of code released for IOS 15 on a 6500.
Keep in mind that Cisco only recently began announcing end of life on IOS. They currently give plenty of notice on these end of life announcements. The SXH train is not end of support until 2016. Though you will likely want to upgrade relatively soon after March 2012 when Cisco ceases patching bugs in the SXH train.
SXI will be continued and no end of life announcement has been made on that train yet. It is recommended in the SXH end of life announcement that you upgrade to SXI or a later release.
Sorry to add on to this. But I was told by a cisco rep that the slb function was going away and being restriced to the ACE appliance.
I have another question about upgrades. How do you upgrade the line cards like the 6748 with daughor board. its a 48 port 10/100/1000 copper card. We have the same model cards just bought at different times. Both the card and daughor have different versions on them depending on when we bought them.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...