I have two 6509's at the core of our network. They are both running at about 30% constantly when displaying a sho proc cpu i get this
sho proc cpu | ex 0.00 CPU utilization for five seconds: 30%/20%; one minute: 29%; five minutes: 30% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 14 290029984 872561070 332 0.40% 0.36% 0.34% 0 ARP Input
Thanks for your response. The switches are running native IOS here is the output of the sho ver:
xxxxxxx-6500a>sho ver Cisco Internetwork Operating System Software IOS (tm) c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(19)E1a, EARLY DEPLOY MENT RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 05-Aug-03 23:30 by hqluong Image text-base: 0x40008C00, data-base: 0x41B0C000
ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1) BOOTLDR: c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(19)E1a, EARLY DEPLOY MENT RELEASE SOFTWARE (fc2)
xxxxxxxx-6500a uptime is 3 years, 13 weeks, 1 hour, 4 minutes Time since xxxxxxxx-6500a switched to active is 3 years, 13 weeks, 1 hour, 23 minutes System returned to ROM by power-on (SP by power-on) System restarted at 09:47:35 PST Sat Nov 25 2006 System image file is "sup-bootflash:c6sup22-jsv-mz.121-19.E1a"
cisco WS-C6509 (R7000) processor (revision 3.0) with 227328K/34816K bytes of mem ory. Processor board ID TSC0723007V R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache Last reset from power-on Bridging software. X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). TN3270 Emulation software. 27 Virtual Ethernet/IEEE 802.3 interface(s) 226 Gigabit Ethernet/IEEE 802.3 interface(s) 381K bytes of non-volatile configuration memory.
32768K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.