Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

6506 boot up problem

when i turn on my 6506 switch with the power of 235v and the earthing as 0.8, i get a burning smell and the status of the swithc changes to Red.

i have attached my boot sequence and the show tech.

please let me know what is the issue is it a power problem or the module problem.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: 6506 boot up problem

Error Message OIR-6-PWRFAILURE: Module [dec] is being disabled due to power convertor

failure

Explanation This message indicates that the DC-DC power convertor failed on the specified module. You need to replace hardware. [dec] is the specified module.

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Contact your Cisco technical support representative, and provide the representative with the gathered information.

1 REPLY
New Member

Re: 6506 boot up problem

Error Message OIR-6-PWRFAILURE: Module [dec] is being disabled due to power convertor

failure

Explanation This message indicates that the DC-DC power convertor failed on the specified module. You need to replace hardware. [dec] is the specified module.

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Contact your Cisco technical support representative, and provide the representative with the gathered information.

170
Views
0
Helpful
1
Replies
CreatePlease to create content