Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6506 sup1a problem

6506 sup1a image corrupted, downloaded image via console after downloading, sup1a uncompressed the image but failed with this error:

Uncompressing file: ######################

*** TLB (Load/Fetch) Exception ***

Access address = 0xfffffdc0

PC = 0x80010604, Cause = 0x8, Status Reg = 0x3041c003

Any experience on this?

2 REPLIES
Cisco Employee

Re: 6506 sup1a problem

Hi Friend,

I beliee you are in rommon prompt and you are trying xmodem? If yes can you specify what rate you are trying with xmodem and also if you have catos or ios on your sup 1a.

DO you have pcmcia card also on which image is loaded? This problem could also be because of bad image so you can try downloading image again from cco and try xmodem.

Regards,

Ankur

New Member

Re: 6506 sup1a problem

Right. the image was corrupted so I used xmodem to download the new image(tried both 9600 and 38400bits). Image seems downloaded successfully via xmodem, but sup was not able to load it.

I don't have pcmcia card.

tried different catOS version, but all came to same error. weird.

202
Views
0
Helpful
2
Replies
CreatePlease login to create content