I'm trying to determine the problem of our 6500 switch. One is using Sup720 and the other one is Sup720-3bxl. They are using the same IOS image. That's not an issue right? As there is no specific image only for Sup720 and Sup720-3bxl. Correct me if I'm wrong.
Next, I don't know what's wrong with the show logging output. The switch rebooted unexpectedly and we are in doubt that this might happen again. Please see logs below and please let me know if there's something interesting. If it's a hardware or software issue.
00:01:03: curr is 0x20000
00:01:03: RP: Currently running ROMMON from F2 region
00:01:27: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:30: %SYS-5-CONFIG_I: Configured from memory by console
00:01:32: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.