02-11-2012 05:07 AM - edited 03-07-2019 04:52 AM
I would like to add a redundant supervisor to my core 6509. Is this tricky to do? I know they have to be running the same IOS. I am worried if I put the new supervisor in it will write over the exsisting running config. Any help would be appreciated. Thanks
Catalyst 6000 supervisor 2 (Active) WS-X6K-S2U-MSFC2
Policy Feature Card 2 WS-F6K-PFC2
Cat6k MSFC 2 daughterboard WS-F6K-MSFC2
Solved! Go to Solution.
02-11-2012 05:10 AM
Only the Sup32, VS-Sup720 and the new VS-Sup2T support dual supervisor.
02-11-2012 05:10 AM
Only the Sup32, VS-Sup720 and the new VS-Sup2T support dual supervisor.
02-11-2012 05:24 AM
Thanks
02-11-2012 01:51 PM
Thanks for the ratings.
02-11-2012 01:09 PM
Sup2 support dual supervisor.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper09186a0080088874.html
/Rikard
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide