Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 CaTOS LACP switch over time

All,

We configured a two ports LACP channel between 3750 (IOS) and 6509 CaTOS), traffic is passing on both direction and well balanced.

Then I pull out the receiving fiber on 6509 (I assume 6509 should get LOS), it takes about 500ms for the 6509 to switch traffic to the other port, but it only takes 100ms for the 3750 to switch traffic over to the other port. 500ms is way too long for me, can anyone tell me why?

Thanks,

Li

1 REPLY
Silver

Re: 6509 CaTOS LACP switch over time

Follow the configuration guide for the EtherChannel Between Catalyst Switches Running CatOS and Cisco IOS Software which will help you :

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094953.shtml

441
Views
0
Helpful
1
Replies
CreatePlease to create content