Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 FAN2 Dip Switch?

What is the dip switch on the 6509 FAN2 for? The dip switch options are 'Full' or 'Variable'; what is the difference between 'Full' and 'Variable' for the FAN2?

1 REPLY
Silver

Re: 6509 FAN2 Dip Switch?

Dual in-line package (DIP) switches are electronic packages that consist of a series of tiny switches. DIP switches can be normally open, normally closed, or three stage. A normally open (NO) switch has contacts that are open or disconnected in their unactuated (normal) position. A normally closed (NC) switch has contacts that are closed or connected in their unactuated (normal) position. A three stage switch has three positions (e.g. ON - OFF - ON).

Check out the following link for default Dip Switch setting on Catalyst 6500 Series Switches :

http://www.cisco.com/en/US/products/hw/switches/ps708/module_installation_and_configuration_guides_chapter09186a00805f49ef.htm

135
Views
1
Helpful
1
Replies