Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 gigabit port blade, high number of "pause output" on int

<p>We have a 6509 with a gigabit blade.</p>

<p>We have two VMWare servers hosted on the blade port 32 and 34.</p>

<p>Server on port 32 is doing a disk to disk copy to server on port 34.</p>

<p>There are no no errors or drops, but a high number of "pause outputs" on both interfaces.</p>

<p>The "pause outputs" would indicate congestion.</p>

<p>There does seem to be some random problems with some of the file copies.</p>

<p>Could there be a potential problem with the throughput that could be helped by moving one of the servers to a different port that is not on the same ASIC?</p>

<p> </p>

1 REPLY
New Member

Re: 6509 gigabit port blade, high number of "pause output" on in

Hi,

you're right. Some WS-X6xxx group every 8 ports to 1 ASIC. So you have to seperate them.

We had the same Problem.

Regards, Celio

341
Views
0
Helpful
1
Replies