Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

6509 IDS & Firewall Module

Following configuration is configured :

Can Any one brief it .....

& What are Show command for the same ....So i can aget Output ........

firewall module 8 vlan-group [Group_ID]

firewall vlan-group XX [Vlan_Number]

firewall vlan-group XX [Vlan_Number]

firewall vlan-group XX [Vlan _Number]

intrusion-detection module 7 management-port access-vlan [Vlan_Number]

intrusion-detection module 7 data-port 1 capture

intrusion-detection module 7 data-port 1 capture allowed-vlan [Vlan_Number]

intrusion-detection module 7 data-port 1 capture allowed-vlan [Vlan_Number]

intrusion-detection module 7 data-port 1 autostate include

1 REPLY
New Member

Re: 6509 IDS & Firewall Module

Hi,

for the firewall part use that one http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/command/reference/fwsm_ref.html. For the you may start with 'show run | include intrusion-detection' or read through http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cliguide7.html.

Regards,

uk.

816
Views
0
Helpful
1
Replies
CreatePlease to create content