Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 in native mode IOS w/ 6148-45AF modules

Hello.

I have a WS-C6509 core switch running in hybrid mode (software revisions SP: BTSYNC_cat6000-sup2k8.8-3-6.bin, RP: c6msfc2-dsv-mz.121-27b.E1.bin) that I would like to upgrade to native mode IOS revision c6sup22-dsv-mz.121-27b.E4.bin. The core switch has the following modules installed:

WS-X6K-SUP2-2GE w/ WS-F6K-MSFC2 & WS-F6K-PFC2

WS-X6408A-GBIC

WS-X6148-45AF w/ WS-F6K-FE48-AF

WS-X6348-RJ-45

WS-X6348-RJ-45

WS-X6348-RJ-45

WS-X6348-RJ-45

WS-X6148-45AF w/ WS-F6K-FE48-AF

I would like to confirm that the WS-X6148-45AF modules will function in a 6509 running in native mode with the above mentioned IOS revision.

BTW, my SP has RAM/Flash of 128/32 and my RP has RAM/Flash of 128/16.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: 6509 in native mode IOS w/ 6148-45AF modules

Based on the Release Notes, it seems the support began with 12.2(17d)SXB on Sup2

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html#wp3366098

HTH,

__

Edison.

1 REPLY
Hall of Fame Super Bronze

Re: 6509 in native mode IOS w/ 6148-45AF modules

Based on the Release Notes, it seems the support began with 12.2(17d)SXB on Sup2

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html#wp3366098

HTH,

__

Edison.

223
Views
5
Helpful
1
Replies