Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 interface traffic - network latency

Hi,

Recently I had to trouble shoot 6509 switch, high network latency issue. To my surprise I realized that there is no command (at leat to my knowledge) to check what is the traffic coming in and going out (show mac is giving some octect based output) ... is there any equvilent command for show interface in cisco 6509 switch. Objective is to view the traffic utilization

3 REPLIES
New Member

Re: 6509 interface traffic - network latency

Hi,

Try using this command.It will provide u the detail of protocol,Pkts In,Chars In and Pkts out,Chars Out on all the Vlans and the interfaces.

Switch#show interfaces accounting

AK

New Member

Re: 6509 interface traffic - network latency

my switch is on cat os and dosent have the optiong

6509-Switch> (enable) show interface ?

Re: 6509 interface traffic - network latency

Hi Parsad,

try using show counters module/port

for example

Switch1> show counters 7/24

or you can also use

Switch> show counters 7

and it will list counters for all the ports on module 7

HTH

Shaheen

1512
Views
0
Helpful
3
Replies