Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 PC Card format failed in slot0

I might need to format or delete file into the PC Cards in 6509 slot0, but I can't do it.

I changed the PC Cards with a New and I've the same thing.

Anything suggestion ?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 6509 PC Card format failed in slot0

You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.

http://www.cisco.com/en/US/ts/fn/620/fn62466.html

Mark

5 REPLIES

Re: 6509 PC Card format failed in slot0

Which CF card are you using? Have you tried formatting in another slot or supervisor?

New Member

Re: 6509 PC Card format failed in slot0

Yes, but I can't do It, because I obtain the same result.

I used a "MEM-C64K-ATA-1-64M" memory card.

Is it correct ?

Re: 6509 PC Card format failed in slot0

You may have a faulty card and may need to be replaced. Which supervisor and software version are you running? Also check this field notice and see if it applies to you.

http://www.cisco.com/en/US/ts/fn/620/fn62466.html

Mark

New Member

Re: 6509 PC Card format failed in slot0

Thanks,

I've a Sup1a and It doesn't support the ATA PC CARD.

Best reguard

Hall of Fame Super Gold

Re: 6509 PC Card format failed in slot0

I think it will only accept UP TO 2Gig Type III CF cards.

213
Views
0
Helpful
5
Replies
CreatePlease login to create content