Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 QoS Help

I've tried to apply QoS based on 'priority' to an SVI on a 6509, and since discovered this is not supported.

I've spent a long time reading the Cisco docs on 6500 QoS, but I'm somewhat confused as to what I need to do to enable QoS for the following senario.

- A customer would like to guarantee 40% of available bandwidth( both ingress & egress) across a fibre WAN link based on IP addressing. 
- The SVI is in a VRF.  The Vlan is trunked out a shared GigE interface to a 'transmission switch'. (I can move this to a dedicated physical GigE interface if necessary)


Any help greatly appreciated.

1 REPLY
Cisco Employee

Re: 6509 QoS Help

Hi

Ethernet interface has hardware queues in 6500 swtiches and you can not do shaping but you can allocate a queue for such traffic. It depends on your linecard qudeueing mechanism however I suugest that you review QOS SRND ver 4.0 for more details

http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html#wp1101384

Thanks

Hatim Badr

203
Views
0
Helpful
1
Replies