Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

6509 Redundancy error

Hi, I am getting this error on 6509. The switch contains two redundant sup 32 engines. Please help

Sep 28 21:08:45: %CONST_DIAG-SP-4-ERROR_COUNTER_WARNING: Module 3 Error counter exceeds threshold, system operation continue.

Sep 28 21:08:45: %CONST_DIAG-SP-4-ERROR_COUNTER_DATA: ID:26 IN:1 PO:255 RE:199 RM:255 DV:2 EG:2 CF:10 TF:390

Sep 29 00:02:19: %PFREDUN-SP-4-BOOTSTRING_INVALID: The bootfile sup-bootdisk:s3223-advipservicesk9_wan-mz.122-33.SXH.bin is present on the active supervisor but not on the standby

Sep 29 00:02:20: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing the startup configuration to the standby Router.

1 REPLY
Hall of Fame Super Silver

Re: 6509 Redundancy error

Hello Durkesh,

first two errors are in common with this recent thread

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&topicID=.ee71a04&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd49c74

You may have one faulty sup or problems of communications between the two sups.

Hope to help

Giuseppe

2157
Views
0
Helpful
1
Replies
CreatePlease to create content