Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6509 secondary switch is restarting in VSS

Hi,

While testing failover with 6509 VSS switch.If we shut down the primary switch traffic going fine.when we making up the primary switch again.The secondary switch is restarting.

1 REPLY
Silver

Re: 6509 secondary switch is restarting in VSS

Hi,

This is a very open scenario, we need to narrow down to get to the root cause.

Both the sup should have identical IOS on it if thats not the case then we might run into such scenario.

try to console into the sup that is rebooting and use ctrl + break

this will bring the sup to rommon mode

then manually boot it with the IOS used on the working sup.

This should fix the problem.

Let me know whats the status.

regards,

Varun

377
Views
0
Helpful
1
Replies